wenslens weldernation welding welder weld weldlife pipegang pipewelder tigweld welderup weldeverydamnday weldilicious weldporn welds ffwp fibremetal pipe pipelife pipewelding welddevils weldnation getsome processpiping tillman weldmafia wrangler justins justinboots thorogoodboots justinboots
#repost @cavemanwelder
got this #arcshot of @tcrperformanceinc stacking some dimes looking througha #wenslens Ultra Cool Blue shade 10. He was welding a 1/2" flange to a 1/8" sidewall for his custom fabricated oil pan that will go on his Class 1 racecar. Using an big old green L-Tec Heliarc transformer machine set at 350 amps, working the pedal. 5/32 tungsten, 3/32 5356 welding rod, cooking it in there real good.
#bluedemonweld #welding #dabbin #dimes #droppingdimes #welder #aluminumwelding #5356 #leananddabb
This is an older #arcshot I had buried in my phone bank. It is a look at #backfeeding the bead in some 8" standard wall pipe. This footage happened around 10 o'clock on the pipe, give or take, you can gauge that by the angle of the video. Im not sure of all the parameters i was running but you will notice the controversial 1/16" land that I use. During the second part of the video (slowed down) I hope you can see that the inside wall of the pipe is being consumed and that fusion is not an issue with a land on tig if you can run the surface tension balancing act that is backfeed!! #weldingvideo #weldingtipsandtricks #weldporn #weldernation #arcshot #pipewelding #pipewelder #tcrperformance #jobshop #machineshop #fabshop #wenslens #isuckatweldinginreallife
Soooooo....I was doing some TIG...then my auto darkening good started flashing on me and it was getting annoying soooo idk what's the problem with the hood...my sensitivity is high and the low battery was not flashing or whatever sooo idk....but I am using this non auto shade on this pipeline hood and its alright...maybe gonna get a #wenslens or whatever...but I'm still seeing spots #weldingstudent #weldeveryday #weld #welded #welding #welderup #welder #weldaholics #weldlikeapro #welds #weldilicious #weldschool #weldingschool #tigwelds #tigwelding #tigwelder #tigwelders #tigwelded #tigweld
Turntable action from the other day. I built this thing for around $75 cnd March 2017. Still kickin. These are 1/2" stainless round rod to 1/4" plate and I had the table at max speed for these. I want sure if it would turn fast enough but it did. Just barely. I've turned about 350lbs with it and about 200amps with no issues. So it's been pretty useful when the opportunity comes up definitely speeds up production time and makes really consistent results so I'm happy I built it. If I could just track down some dirt cheap chucks now, I'll be the coolest thing since sliced bread.
#builtnotbought #wenslens