exokart miata deathkart miatakartsofmurica exocar miatakart exomiata ghettocet tubekart builtnotbought fabrication tubebending turbo ecotec ecotecmiata homemadecar mazda oneofakind turboecotec chopped driftcar kart mazdamiata racecar rollcage racekart autocross deathkartlife
Miata death kart build by: @iizraeeel -----‐---‐------------------------------------
Go follow @death_karts for more death kart builds!
.
.
.
#exo #kart #exokart #exocar #deathkartlife #deathkart #chopped #project #projectcar #hoppy #itsalifestyle #buildnotbought #miata #mazdamiata #4cylinder #rwd #driftkart #driftcar #drift #mx5 #mazda #krowrxgotbars #krowrx
Welded up the trans tunnel, went ahead and pulled the front subframe back off and now I’m ready to swap my oil pan out. My other oil pan already has the turbo oil return line fitting welded up. I’ll also be able to check and see if my engine has factory forged rods or not. This will determine what I set my power levels at. My harness is on its way back now. So as soon as I get it back I’ll hook everything up and do a test start. As long as it fires up, I’ll pull the rest of the roller apart for cleaning and prep it for final assembly. #ecotec #ecotecmiata #miata #miatakart #exocar #ghettocet #exomiata #builtnotbought #tubechassis #turbo #turboecotec #racecar #oneofakind #tubebending #tubeframe #homemadecar #customcar #exokart #tubekart #autocross #driftcar #engineswap #performance #racetrack #fab #fabrication #custom #scratchbuilt
Work has had me busy lately but finally back to working on the project. Depowered my steering rack today. One step closer. #ecotec #ecotecmiata #miata #miatakart #exocar #ghettocet #exomiata #builtnotbought #tubechassis #turbo #turboecotec #racecar #oneofakind #tubebending #tubeframe #homemadecar #customcar #exokart #tubekart #autocross #driftcar #engineswap #performance #racetrack #fab #fabrication #custom #scratchbuilt
Making progress again. Welding is now 100% complete on the chassis. Next I’ll begin prepping it for paint. Pulled the engine harness, throttle body, ECM and FBW pedal and it’s all be shipped back to the harness shop tomorrow to be reworked again and checked all over to figure out what went wrong. Hopefully the next time I get it back there won’t be any issues. Next on the list is to weld up the intercooler piping and trans tunnel, and depower the steering rack. The rest of the roller will be completely disassembled for cleaning. #ecotec #ecotecmiata #miata #miatakart #exocar #ghettocet #exomiata #builtnotbought #tubechassis #turbo #turboecotec #racecar #oneofakind #tubebending #tubeframe #homemadecar #customcar #exokart #tubekart #autocross #driftcar #engineswap #performance #racetrack #fab #fabrication #custom #scratchbuilt